Direct-Wire for best efficacy & low energy cost
Maritime/MSC LED Tubes
The Energy Focus Maritime/MSC LED Tube utilizes a direct-wire installation mode. Direct-wire TLEDs require that any existing ballast be removed and the TLED be rewired to operate on AC line voltage. Simple re-wiring and replacement of non-shunted lamp holders are also required. By removing the ballast your TLED no longer depends on any additional hardware to function normally and also minimizes points of failure – less maintenance required.
SPECIFICATION
| Wattage | 8 Watts (24″) or 16W (48″) |
| Connection | Medium bi-pin (G13) end cap |
| Housing | Oval extruded aluminum / polycarbonate lens |
| Efficacy | 125 lm/W |
| Color Temperature | 4000K |
| CRI | >80 |
| Lens | Polycarbonate lens – Frosted lens |
| Input Voltage | 100-277 VAC, 50/60 Hz |
| Driver | Integrated driver, single-ended power |
| Environmental Requirements | Operating temp: -20 to +50°C Storage temp: -30 to +60°C Working humidity: 30% to 85% Storage humidity: 10% to 90% Non-corrosive environments |
| Lumen Output | 8W = 1,000 lumens; 16W = 2,000 lumens |
| Warranty | 5-Year Warranty |