© 2023 Energy Focus. All Rights Reserved. | POWERED BY THEWEBDESIGNHUB
Menu
The Energy Focus 300D Series LED Tube utilizes a direct-wire installation mode. Direct-wire TLEDs require that any existing ballast be removed and the TLED be rewired to operate on AC line voltage. Simple re-wiring and replacement of non-shunted lamp holders are also required. By removing the ballast your TLED no longer depends on any additional hardware to function normally and also minimizes points of failure – less maintenance required. In addition, the 300D Series provides 130 lm/W efficacy.
| Wattage | Available in 8W, 13W, and 18W |
|---|---|
| Connection | Medium bi-pin (G13) end cap |
| Housing | Oval extruded aluminum / polycarbonate lens |
| Efficacy | 130 lm/W |
| Color Temperature | 3500, 4000, 5000K |
| CRI | >80 |
| Lens | Polycarbonate lens |
|---|---|
| Input Voltage | 100-277 VAC, 50/60 Hz |
| Driver | Single ended design |
| Environmental Requirements | Operating temp: -20 to +50°C Storage temp: -30 to +60°C Working humidity: 30% to 85% Storage humidity: 10% to 90% Non-corrosive environments |
| Lumen Output | Between 1040-2340 lumens (wattage dependent) |
| Warranty | 10-Year |
White papers
June 17, 2017
Energy Focus is committed to remaining a leader in the industry and providing safe, efficient and effective products
White papers
June 17, 2017
LED Lighting inherently flickers, however, lighting products that remove flicker offer optimal light output as well as reduce migraines,eye strain and fatigue.
Find a complete list of all common terms and definitions associated with LED technology.
Have questions about Energy Focus LED lighting products? Contact us today for information and support for your LED lighting products and purchases.
© 2023 Energy Focus. All Rights Reserved. | POWERED BY THEWEBDESIGNHUB